Title   |
Price |
Picture | |
|---|---|---|---|
| add to favorites | MSB Coarse Powder Mill |
 |
|
| Brief Introduction MSB Coarse Powder Mill is a kind of new high-tech milling machine to meet the requirements of coarse powder processing customers. Based on our experts' years' research experience in the milling industry and considering recommendations and requirements of domestic and foreign clients. It is the ideal equipment to replace Raymond Mill, ball mill, and other traditional mill which only process fine powder materials. It is high-efficiency equipment and widely applied in quartz sand, silica sand, foundry sand, fine sand and other sand abrasive industry. By being a component of closed production lines, it can produce various size products of better effect. Working Principle: Step with main shaft, bulk disk and roller bracket is driven by motor through reducer. Installed above bracket, roller assembly rotates with main shaft and swings freely meantime, this bring a large centrifugal force, which scatters bulk materials evenly in grinding intermediate layer between central roller and ring. The bulk materials are grinded into powder and fall on the bottom, and then discharged from discharging opening under the effect of synchronously-rotating scraper. Technology Advantages: 1. High efficiency of wear material, wear evenly, the lifetime is three times higher than that of Raymond Mill; 2. High percentage of sand can be produced by this machine; 3. The mill is a highly efficient desulfurization equipment of power plant. It can grind CaCO3 into fine powder less than 1-2mm, the desulfurization effect is better; 4. This machine can be used as pre-grind equipment before ball mill; the ball mill efficiency will increase 50%; 5. Products out of this machine can be used to make firebrick, concrete brick, block and other new building materials; 6. Mainly used for pre-processing of various crushable non-inflammable & non-explosive brittle material with Mohs Hardness less than nine. Model: MSB1004, MSB1205 Roller quantity(pcs): 4, 5 Max. feeding size(mm): <30, <35 Product size(mm): 70-90%<2, 70-90%<2 Capacity(ton/hour): 8-15, 16-30 Main motor power(kw): 37-45, 75-90 Overall size(mm) (LxWxH): 1870x1500x2580, 2350x1850x2850 weight : 8, 14 | |||
| add to favorites | Ball Mill |
 |
|
| Ball mill is an important kind of equipments for the secondary grinding .After the material entering the hollow axis by the feeder, the material will be taken evenly and spirally into the first warehouse, where there is the ladder liner or the ripple liner with the different steel balls. When the tube structure revolving produces the centrifugal force, the steel balls will be carried higher to some extent, and then centrifugal force, the steel balls will be carried higher to some extent, and then fall down to strike and grind the material, After grinded generally in the first warehouse, the material then will be taken into the second warehouse, in which there is the flat liner, the material will be regrind and then be discharged through the discharge grate liner. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Two kinds of process methods: wet process or by dry process are both available. The Ball mill Model: Ф1830×3000,Ф1830×6400,Ф1830×7000,Ф1830×6400,Ф1830×7000,Ф2200×5500,Ф2200×6500,Ф2200×7500,Ф2400×3000 Weight of ball mill:14,15,11,23,25,30,30,33,25.8 Trademark:SHIBANG Standard: Iso 9001:2000 Productivity: Quantity Unit Price/Payment: T/T Origin: China Min. Order: Unlimited | |||
| add to favorites | P Pendulun Grinder |
 |
|
| P Pendulum Grinder is suitable for producing minerals power, which is widely used in the metallurgy, building materials, chemical, and mining industry. It can be used for grinding barite, calcite, potash feldspar, talc, marble, ceramic, glass and some other material that Moh's hardness degree is below 7, humidity is in 6%, and non-flammable non-explosive minerals. The final product size is adjustable as required in the range of 100-325 meshes. The model of our raymond mill :3R2115,3R2615,3R2715,3R3016,4R3216 Our raymond mill Max.Feeding size(mm) :15,15-20,15-20,15-20,20-25 Our raymond mill Fineness of product (mm) :0.44-0.165,0.44-0.165,0.44-0.165,0.44-0.165,0.44-0.165 power for Raymond mill Machine(kw) :15,18.5,22,30,37 | |||
| add to favorites | Straight Centrifugal Grinder |
 |
|
| Straight Centrifugal Grinder, which is widely used in mining, chemical, metallurgy industry, can grind the carborundum,zirconite,quartz,granite,barite,marble,limestone,talc,gypsum,slag,porcelain,glass and other more than 200kinds of material that Moh's hardness is below 9.5,non-explosive,non-flammable mineral. The final products can be adjusted required between 0 and 2.8mm. Out Straight Centrifugal GrinderType :ZTM86 ,ZTM 125,ZTM 165 Feed size of Straight Centrifugal Grinder(mm) :＜ 16,＜ 25 ,＜ 35 Product size(mm):0-2.8,0.044-5,0.044-5 Capacity(t/h) of the Straight Centrifugal Grinder :7-11,15-55,30-120 Power of Main motor(Kw):37 ,90-110,185-200 Dimension(mm) :2600×2100×2400 ,Φ2300×5600,Φ3600×8200 | |||
| add to favorites | SCM series S super thin mill |
 |
|
| On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power. SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals. Note: When users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened. Model : SCM6015 , SCM8021 , SCM1027 Roller number: 15, 21, 27 Diameter (mm) : Φ600, Φ800 , Φ1000 Ring number:2,2,2 Main unit speed(mm):235,235,235 Max. feeding size(mm):10, 10, 10 Final size (mesh): 325-2500, 325-2500, 325-2500 Capacity (kg/h): 350-2500, 600-4000, 900-6000 Overall dimension (m): 10×2×5.5, 12.4×2.5×5.8, 14.5×3.8×6.3 | |||
| add to favorites | MTM Medium Speed Trapezium Mill |
 |
|
| Our MTM Medium Speed Trapezium Mill Introduction: Designed by our experts after many year's effort of our experts and other technicians, MTM Medium Speed Trapezium Mill has been one of the best in the industrial grinding mill world. It adopts the trapezium working surface, resilient connection, roller linkage pressure adding to get the power and some other patent technologies ,tackles the difficulties in the usage, capacity, energy-cost, short service life. This model of the grinding mill is the best substitute of the traditional grinding mills. It is mainly used for grinding mineral products in metallurgical industry,construction field,chemical industry,mine,coal industry and etc.And it is the equal to the Equipments foe desulphurization,and always the best choice of our customers.This series products can grind all kinds of non-flammable and non-explosive minerals Moh's hardness is lower than 9.3 and humidity is lower than 6%.The size of the final products can be adjusted between 30 and 400 meshes as required. Shibang MTM Medium Speed Trapezium Mill Superiorities: Compared with the traditional Vertical grinding mill, MTM Series Medium Speed Trapezium Mill has six superiorities: 1. The rollers and rings are designed in inverted trapezium, which reduces the slip velocity of the material, prolongs the time for grinding, increases the grinding efficiency. 2. This machine adopts pressure spring balanced adding pressure, which enables the Force point increased 40%.Damping can be realized through the resilient joint, which can still avoid resonance. 3. Being equipped with the high density vane of the finer power collector to increase the power fineness, under the same rotational speed, the capacity of the final power can be increased 50%. 4. The high-efficient energy-saving centrifugal induced wind fan is available. The efficiency of the impact vane of air blower in the traditional grinding mill is only 62%.but the energy conservation impeller and the vane induced wind fan is 85%. 5. The patent impeller adjuster: the size of the gap between the tip of the separator vane and the shell can be easily adjusted to get the power fineness. 6. The unique design of the air flue inclining to the inside, this can enable the material in the wind falling into the grinding room along with the slope. Constitutes: This machine mainly consists of main frame, Power Collector, Decelerator, Air Blower, Bag Dust Catcher, Piping System, Cyclone Collector, Motors. And other provided equipments are Jaw crusher, Hopper Elevator, Feeder, Electric Control Cabinet, and etc. Item:MTM100,MTM130,MTM160 Number of roller:4,5,6 Major diameter of roller *Height(mm):Φ320*200,Φ410*240,Φ440*270 Output (t/h):3 -8.8,6-13,13-22 Weight(t):16,26.1,35 | |||
Please register or log in.
©
MTP Classifieds P. O. Box: 8338, Sharjah, UAE
Tel: +971 6 5596311 / Fax: +971 6 5596310
E-mail Us
